Mould Inhibitor

Feed of the world's average annual loss accounts for about 20 percent of the total output, nearly half of which were the result of mildew. Mildew not only influences the quality of the feed, but also reduces animal feed intake, induces diarrhea, abnormal physiological or even poisoning death. The addition of the mould inhibitor is an important measure for ensuring the safety of feed quality and animal health. 1 Product Specification Trade name Meike100 Meike200 Meike300 Product code M100 M200 M300 Appearance Grey - white powder White powder Green powder Main effective constituents Propionic acid, calcium propionate Propionic acid amine, benzoic acid Sodium diacetate dimethyl fumarate Content of effective constituents ≥50% ≥50% ≥50% Recommended Dosage(gram/T feed) 500-1000 1000-1500 1500-2000 Applied conditions Low in feed water content, air temperature and humidity Low in feed water content; medium-high in air temperature and humidity High in feed water content; air temperature and humidity Packing 20kg / Bag Shelf life 12 months in sealed condition Storage condition Tightly sealed and stored in a dry, dark and cool place 2 Principle of Action Mould inhibitors depress the growth and proliferation of moulds by two ways. First of all, mould inhibitors can destroy the membrane structure of some moulds; secondly, mould inhibitors can pass cell membrane and disturb microbial enzymatic system, confuse the protein metabolism, thus limit the growth and proliferation of moulds. 3The Function of Mould Inhibitor 3.1Increasing the nutritive value of the feed by preventing feed from mildewing; 3.2Promoting the growth rate of animal;3.3Increasing the availability of the feed;3.4Decreasing the diarrhea rate of animal;3.5Decreasing the abortion, out of heat, fetal death and false Pregnancy of the female animals.4 Features of Enhalor Mould Inhibitor 4.1According to different environment and feed conditions, Enhalor provides a series of mould inhibitors, so the specificity is high; 4.2Enhalor mould inhibitors are composed of organic acids and their salts, so there are broad antimicrobial spectrum and appropriate additive amount; 4.3Special processing steps are conducted in raw material, so Enhalor mould inhibitors have better fluidity and less corrosive; 4.4Quality Control and Traceability System are applied in the process of the mould inhibitors, which ensure the process quality of the mould inhibitors is perfect. 5 Direction for Usage 5.1The type and its quantity of the mould inhibitors are different in different environment and feed conditions. Mould inhibitors are not essential when the feed water content, air temperature and humidity are low. The additive level of the mould inhibitors increase with the increasing of feed water content, air temperature and humidity; 5.2The additive amount is influenced by some feed constituents, such as calcium, starch; 5.3It is necessary to wear protective gear in process because of corrosive activity of raw material; 5.4Mixing uniformity at batching.